INDUSTRY SILO
MAFA silo is made of high quality sheet steel coated with aluminum and zinc. We provide a 10-year material warranty against rusting
on our factory assembled silos. The extraction from our UNIK silos, combined with our UNIK-auger takes place through mass flow, which means First in- First out with minimal separation of material. The material is emptied in the order in which it is filled. This creates a uniform homogeneous quality during the storage period.
The silos can be equipped according to each customer’s wishes and needs, see more under accessories
Standard silos are dimensioned to be able to handle loads of up to 750 kg/m³. Special silos can be adapted for higher volume weights.
MAFA UNIK Silo
Our MAFA UNIK is made in Sweden and is available in three different models. The silo has a stable construction and is made of high-quality steel sheet coated with aluminium and zinc. A quality sheet with a longer shelf life compared to, for example, galvanized sheet.
The UNIK silo can be combined with our MAFA UNIK Screw Boxes for mass flow according to the principle First In – First Out. The technology allows the quality of the bulk product to be preserved thanks to minimal separation, unlike traditional emptying.
The silo has a large cyclone with natural ventilation that prevents condensation in the silo. The steep roof slope allows the silo to be filled to the maximum for less empty space in the silo. A gentle and even emptying is achieved thanks to the smooth inside with special bolt and steep cone. The shiny surface coating of the silo means that the heat radiation in the silo is reduced as minimal heat enters the silo. This is especially important if the silo is filled with temperature-sensitive material.
MAFA offers a wide range of screw boxes for different capacity requirements for all our silos.
Why choose a MAFA UNIK silo?
- Longer service life thanks to high-quality sheet metal
- Gentle and efficient filling with a roof adapted for filter solution
- Roof sheets adapted for blasting plates
- Gentle emptying and bottom collar adapted for the discharge unit
- Wide range of auger boxes for different capacity requirements
MAFA UNS3
70° cone, 45° roof, ø - 1,89 m
Model
Volume – m³
Height – m
Ton at 650 kg/m³
UNS3
3,6
3,49
2,3

UNS3
MAFA UNIK Small
70° cone, 45° roof, ø - 1,89 m
Model
Volume – m³
Height – m
Ton at 650 kg/m³
UNS6
6,3
5,33
4,1
UNS9
8,9
6,29
5,8
UNS12
11,5
7,25
7,5
UNS14
14,1
8,21
9,2

UNS14
MAFA UNIK
70° cone, 45° roof, ø - 2,35 m
Model
Volume – m³
Height – m
Ton at 650 kg/m³
UN12
12,0
6,52
7,8
UN17
17,1
7,72
11,1
UN22
22,3
8,92
14,5
UN27
27,5
10,12
17,9
UN33
32,6
11,32
21,2
UN38
37,8
12,52
24,6

UN38
MAFA UNIK Big
70° cone, 45° roof, ø - 3,13 m
Model
Volume – m³
Height – m
Ton at 650 kg/m³
UNB25
24,6
7,91
16,0
UNB34
33,8
9,11
22,0
UNB43
42,9
10,31
27,9
UNB52
52,1
11,51
33,9
UNB61
61,3
12,71
39,8
UNB70
70,4
13,91
45,8
UNB80
79,5
15,11
51,7

UNB80
MAFA BIB SILO
MAFA BIB can receive a maximum ton of bulk goods and is made in Sweden. The silo is made of high-quality steel sheet coated with aluminium and zinc. A quality sheet with a longer shelf life compared to, for example, galvanized sheet. It has a smooth inside with a special bolt and steep cone that allows it to empty well without separation.
The silo has a large cyclone with natural ventilation that prevents condensation in the silo. The steep roof slope allows the silo to be filled to the maximum for less empty space in the silo. The silo has a large cyclone with natural ventilation that prevents condensation in the silo. A gentle and even emptying is achieved thanks to the smooth inside with special bolt and steep cone. The shiny surface coating of the silo means that the heat radiation in the silo is reduced as minimal heat enters the silo. This is especially important if the silo is filled with temperature-sensitive material.
The silo can be ordered with cladding for a complete exterior design.
Why choose a MAFA BIB?
- Receives many tons of bulk goods, e.g. granules
- Longer service life thanks to high-quality sheet metal
- Gentle and efficient filling with a roof adapted for filter solution
- Roof sheets adapted for blasting plates
- Gentle emptying and bottom collar adapted for the discharge unit
- Wide range of screw boxes for different capacity requirements
- Can be ordered with cladding
MAFA Big
62° cone, 45° roof, ø - 3,13 m
Model
Volume – m³
Height – m
BIB21
21,1
6,91
BIB30
30,2
8,11
BIB40
39,4
9,31
BIB49
48,6
10,51
BIB58
57,7
11,71
BIB67
66,9
12,91
BIB76
76,1
14,11
BIB85
85,2
15,31

BIB85
MAFA IB SILO
MAFA IB is our silo specially designed for industry. The silo is Swedish-made and has a stable construction. The roof has a 12° slope, which makes it easy to install platforms and penetrations. The silo has a special cyclone connection for optimal deaeration via the cyclone without condensation. It is also possible to connect a silo top filter to the 12° ceiling if a filter solution is desired instead of cyclone. The roof sheets are designed with the possibility of installing blasting plates.
The silo is made of high-quality steel sheet coated with aluminium and zinc. A quality sheet with a longer shelf life compared to, for example, galvanized sheet. The silo has a smooth inside with a special bolt and steep cone that means that it empties well without separation. The shiny surface coating of the silo means that the heat radiation in the silo is reduced as minimal heat enters the silo.
Why choose a MAFA IB?
- Specially designed for industry
- The surface coating reduces heat radiation in the silo
- Minimal friction and gentle emptying thanks to the smooth inside with special bolt
- Longer service life thanks to high-quality sheet metal
- Gentle and efficient filling via long-radius bend
- Ceiling adapted for filter solution or cyclone
- Roof sheets adapted for blasting plates
- Wide range of screw boxes for different capacity requirements as well as bottom collar adapted for the output unit
OUTDOOR SILO INDUSTRY Big
62° cone, 12° roof, ø - 3,13 m
Model
Volume – m³
Height – m
IB18
17,6
6,13
IB27
26,7
7,33
IB36
35,9
8,53
IB45
45,1
9,73
IB54
54,2
10,93
IB63
63,4
12,13
IB73
72,6
13,33
IB82
81,7
14,53
IB86
86,2
15,13

IB86
MAFA UNB-I Silo
The MAFA UNB-I is specially designed for industry. It is Swedish-made and has a stable construction. The roof has a 12° slope, which makes it easy to install platforms and penetrations. The silo has a special cyclone connection for optimal deaeration via the cyclone without condensation. It is also possible to connect a silo top filter to the 12° ceiling if a filter solution is desired instead of cyclone. The roof sheets are designed with the possibility of installing blasting plates.
The silo is made of high-quality steel sheet coated with aluminium and zinc. A quality sheet with a longer shelf life compared to, for example, galvanized sheet. It has a smooth inside with a special bolt and steep cone that allows it to empty well without separation. The shiny surface coating of the silo means that the heat radiation in the silo is reduced as minimal heat enters the silo.
Why choose a MAFA UNB-I?
- Specially designed for industry
- The surface coating reduces heat radiation in the silo
- Minimal friction and gentle emptying thanks to the smooth inside with special bolt
- Longer service life thanks to high-quality sheet metal
- Gentle and efficient filling via long-radius bend
- Ceiling adapted for filter solution or cyclone
- Roof sheets adapted for blasting plates
- Wide range of screw boxes for different capacity requirements as well as bottom collar adapted for the output unit
OUTDOOR SILO INDUSTRY UNIK Big
70° cone, 12° roof, ø - 3,13 m
Model
Volume – m³
Height – m
UNB21-I
21,1
7,13
UNB30-I
30,4
8,33
UNB39-I
39,4
9,53
UNB49-I
48,6
10,73
IUNB58-I
57,8
11,93
UNB67-I
66,9
13,13
UNB76-I
76,0
14,33

UNB76-I
MAFA XB Silo
MAFA XB is our largest silo that can store up to 189 m3. The silo is Swedish-made and has a stable construction. It is made of high-quality steel plate coated with aluminum and zinc. A quality sheet with a longer shelf life compared to, for example, galvanized sheet.
The silo has a large cyclone with natural ventilation that prevents condensation in the silo. The steep roof slope allows the silo to be filled to the maximum for less empty space in the silo. A gentle and even emptying is achieved thanks to the smooth inside with special bolt and steep cone. The shiny surface coating of the silo means that the heat radiation in the silo is reduced as minimal heat enters the silo. This is especially important if the silo is filled with temperature-sensitive material.
MAFA also offers a wide range of screw boxes for different capacity requirements.
Why choose a MAFA XB?
MAFA XB is our largest silo that can store up to 189 m3. The silo is Swedish-made and has a stable construction. It is made of high-quality steel plate coated with aluminum and zinc. A quality sheet with a longer shelf life compared to, for example, galvanized sheet.
The silo has a large cyclone with natural ventilation that prevents condensation in the silo. The steep roof slope allows the silo to be filled to the maximum for less empty space in the silo. A gentle and even emptying is achieved thanks to the smooth inside with special bolt and steep cone. The shiny surface coating of the silo means that the heat radiation in the silo is reduced as minimal heat enters the silo. This is especially important if the silo is filled with temperature-sensitive material.
MAFA also offers a wide range of screw boxes for different capacity requirements.
Why choose a MAFA XB?
MAFA XB is our largest silo that can store up to 189 m3. The silo is Swedish-made and has a stable construction. It is made of high-quality steel plate coated with aluminum and zinc. A quality sheet with a longer shelf life compared to, for example, galvanized sheet.
The silo has a large cyclone with natural ventilation that prevents condensation in the silo. The steep roof slope allows the silo to be filled to the maximum for less empty space in the silo. A gentle and even emptying is achieved thanks to the smooth inside with special bolt and steep cone. The shiny surface coating of the silo means that the heat radiation in the silo is reduced as minimal heat enters the silo. This is especially important if the silo is filled with temperature-sensitive material.
MAFA also offers a wide range of screw boxes for different capacity requirements.
Why choose a MAFA XB?
MAFA XB is our largest silo that can store up to 189 m3. The silo is Swedish-made and has a stable construction. It is made of high-quality steel plate coated with aluminum and zinc. A quality sheet with a longer shelf life compared to, for example, galvanized sheet.
The silo has a large cyclone with natural ventilation that prevents condensation in the silo. The steep roof slope allows the silo to be filled to the maximum for less empty space in the silo. A gentle and even emptying is achieved thanks to the smooth inside with special bolt and steep cone. The shiny surface coating of the silo means that the heat radiation in the silo is reduced as minimal heat enters the silo. This is especially important if the silo is filled with temperature-sensitive material.
MAFA also offers a wide range of screw boxes for different capacity requirements.
Why choose a MAFA XB?
- Can accept maximum volume of bulk goods, e.g. granules
- Best emptying safety with steep, self-emptying cone and large bottom opening
- Longer service life thanks to high-quality sheet metal
- Gentle and efficient filling with a roof adapted for filter solution
- Roof sheets adapted for blasting plates
- Gentle emptying and bottom collar adapted for the discharge unit
- Wide range of screw boxes for different capacity requirements
MAFA XB
50° cone, 30° roof, ø - 4,69 m
Model
Volume – m³
Height – m
XB86
86,1
9,63
XB107
106,7
10,83
XB127
127,4
12,03
XB148
148,0
13,23
XB169
168,6
14,43
XB189
189,3
15,63

XB189
MAFA Module silo
MAFA Modular silo, a square silo of high quality. The silo is made of hot-dip galvanized sheet metal. Choose between our space-saving indoor and outdoor silos. We also have modular silos for hard-flowing materials, our CLEANSILO, as well as an affordable alternative in confined spaces, MODULSILO Agro.
Our Modulsilo Silos can be delivered as a kit, which contributes to lower carbon dioxide emissions during shipping and reduced shipping costs.
A number of different screw boxes and suction boxes are available as an option for our Modular silos.
Why choose MAFA Modular Silo?
- Indoor or outdoor silo
- Maximum use of space, especially important indoors
- Easy to assemble yourself
- Adapted installation to existing building
- Lower carbon emissions and shipping costs when delivered as a kit
MODULE INDOOR silo
A space-saving, heavy-duty indoor silo of high quality in hot-dip galvanized sheet metal. The silo is available in a number of sizes, as square or rectangular, as well as with a 45° or 60° cone tilt. The silo is equipped with an inlet pipe on the sedan, a filter bag for venting and a flat roof for efficient use of space. The outlet is equipped with a sliding damper.
Inspection hatch and roof included as standard.
A number of different screw boxes are available as an option for our Modulsilos and suction boxes.
Why choose MODULSILO Indoors?
Maximum use of space
Easy to install
With venting via filter bag
Lower carbon emissions and shipping costs when delivered as a kit
With several optional auger boxes

MODULE Outdoor silo
A square outdoor silo of high quality in hot-dip galvanized sheet metal. Equipped with cyclone and 45° roof. The silo is available in a number of sizes and with 45° or 60° cone tilt. The outlet is equipped with a sliding damper.
Mainly recommended for easy-flowing materials such as fuel pellets and plastic granules etc.
Inspection hatch and roof included as standard.
A number of different screw boxes are available as an option for our Modulsilos and suction boxes.
Why choose MODULSILO Outdoors?
- Maximum use of space
- Easy to install
- With cyclone for natural ventilation and 45° roof in durable aluzinc
- Lower carbon emissions and shipping costs when delivered as a kit
- With several optional auger boxes

MAFA Agro Module silo
An affordable option in confined spaces indoors. The silo is available in a number of sizes, as square or rectangular, as well as with a 45° or 60° cone tilt. The outlet is equipped with a sliding damper.
Made of high-quality, hot-dip galvanized sheet.
A number of different screw boxes are available as an option for our Modulsilos and suction boxes.
Why choose MAFA Agro Modular Silo?
- Maximum use of space
- Easy to install
- Lower carbon emissions and shipping costs when delivered as a kit
- With multiple optional auger boxes
CLEAN SILO indoors
MODULSILO CLEAN Indoor is a silo for hard-to-drain materials. The silo has a completely smooth inside with no internal braces. All bolts and screws are located on the outside for minimal friction and prevent material from accumulating. A square silo with a 45° or 60° cone tilt.
Made of high-quality, hot-dip galvanised steel sheet.
Why choose MODULSILO CLEAN Indoors?
- Minimal friction
- Steep self-emptying cow
- Maximum use of space
- Made of hot-dip galvanized steel of very high quality.
MAFA Module Silo Mobile
A mobile modular silo on wheels that can be easily moved even with a forklift thanks to the silo’s fork pockets.
The silo is rectangular for maximum space utilization, has a cone tilt of 45° and is equipped with dampers.
Made of hot-dip galvanised sheet steel and delivered as a kit.
Why choose a MOBILE MODULAR SILO?
- Flexible and easy to move
- Maximum use of space
- Easy to install
- Lower carbon emissions and shipping costs when delivered as a kit

Auger silo – for floury material
Our Screw Silo is the perfect choice for storing and emptying flour and other materials, where there is a risk of arching and hanging as a result.
The silo is modular and has a smooth, edge-free internal construction made of hot-dip galvanized sheet metal, for good hygiene in the silo. The silo has a specially developed cone with a strong screw chute at the bottom. The auger has two pitches for even emptying.
Agitators are available and should be fitted when driving particularly difficult material. Depending on the silo size, the silo is supplied with chain drive from the screw motor or with a separate worm gear motor.
All MAFA engines have overheat protection.
Why choose a screw silo?
- Specially developed for handling flour
- Mixer can be selected for
- Maximum use of space

MAFA Vertical Mixing Modular Silo
Our vertical mixing Silo is a modular silo with a specially developed mixing system.
The silo has a smooth, edgeless internal construction made of hot-dip galvanised sheet steel. The innermost cone is designed for a high material flow to the outlet.
Our vertical mixing Silo is a further development of CLEANSILO Indoors.
The silo is supplied as standard with a reinforced cover with fasteners and hatches, as well as safety grilles for inspection or service of screws.
Why choose Vertical Mixing Modular Silo?
- Vertical mixing silo
- As an indoor silo or outdoor silo
- Maximum use of space

SUCCÉ-BIO STORAGE
2 sections
3 sections
4 sections
5 sections
Height – m
m³
m³
m³
m³
1,85
5,2
7,9
10,6
13,3
2,33
7,3
11,0
14,8
18,5
2,81
9,3
14,1
18,9
23,7
3,29
11,4
17,2
23,1
29,0
3,77
13,4
20,4
27,3
34,2
2 sections
3 sections
4 sections
5 sections
Lenghts – m
2,46
3,69
4,92
6,15
Width – m
1,88
1,88
1,88
1,88
VILLA STORAGE
Technical data:
Villa Indoor
Villa Outdoor
Villa Indoor
Villa Indoor
Villa Outdoor
Villa Outdoor
Villa Chapel
Villa Cone
Art no
330
345
345-1
345-9
347
347-9
348
354
Height – m
1,91
1,91
1,66
2,77
1,94
2,80
2,13
0,81
Length – m
2,39
2,39
2,39
2,39
2,38
2,38
2,40
2,39
Width – m
1,39
1,89
1,89
1,89
1,88
1,88
1,90
1,89
Volume – m³
4,1
5,7
4,7
9,2
5,7
9,2
5,7
0,76
Weight – kg
250
280
255
400
310
430
300
125